DeLorme 6 GPS Receiver User Manual


 
Using Projects
77
The minimum and maximum zoom range displays above the Set Zoom Range
For Display area.
11. Click Next.
12. Select the check box next to each connection usage you want to include with
your point properties.
13. Click Finish.
The Contour Properties for that dataset are modified and are visible on the
map.
Notes
The contour property changes are only made in the current project.
You must save your project to retain the property changes.
Selecting Custom changes the Interval section in the Control Panel to
read, "Custom."
Changing Coordinate Grid Properties
Use the Properties option on the Map Data tab to change the properties of various
map features, such as coordinate grids, rasters, vectors, shaded relief, contours,
points, and so on.
You must select to show grids in the Display tab of the Options dialog box to view
any changes made to the coordinate grid properties on the map. See Displaying
Basic Map Features for information on showing/hiding grids.
To Change Coordinate Grid Properties
Use the following steps to change the properties of coordinate grids.
1. Click the Map Data tab.
2. Under Secondary Map or Primary Map, click the plus sign next to the
dataset for which you want to modify the properties.
3. Click the plus sign next to the sub-data category.
4. Highlight Grid Lines, click Data, and then click Properties.
The Coordinate Grid Properties dialog box opens.
OR
Right-click Grid Lines and click Properties.
The Coordinate Grid Properties dialog box opens.
5. Under Set Data Zoom Range For Display, drag the gray tab markers to the
minimum and maximum level you want.
The minimum and maximum zoom range displays above the Set Zoom Range
For Display area.
6. Click Next.
7. Select the check box next to each connection usage you want to include with
your coordinate grid properties.
8. Click Finish.
The Coordinate Grid Properties for that dataset are modified and are visible
on the map.
Note The coordinate grid property changes are made only in the current
project. You must save your project to retain the property changes.
Changing USGS Quad Line Connection Properties
Use the Properties option on the Map Data tab to change the properties of various
map features such as USGS quad line connections, rasters, vectors, shaded relief,
contours, points, etc.