Filter
Top Products
XMap User Guide
366
8. Click Send.
A progress bar indicates the copy status.
9. Click Done.
10. On your Earthmate PN-40, press ENTER to return to GPS use.
To Receive Maps
Use the following steps to receive maps from your Earthmate PN-40 GPS or SD card
into your mapping application.
1. Connect your Earthmate PN-40 to your computer with the USB cable and
power it on.
The Connect to Computer screen appears.
2. On the device, highlight Map Transfer and press ENTER. Then, highlight
Transfer to SD Card if the map is on an SD card or Internal Memory if the
map is stored in internal memory, and then press ENTER.
When the Transfer Maps message appears, your Earthmate PN-40 is ready for
transfer. Set it aside.
3. In XMap, click the Exchange button
on the toolbar.
The Earthmate PN-Series Exchange dialog box opens.
4. If you are receiving maps from an SD card, select the removable drive (for
example, Removable Disk E: Removable Disk) from the drop-down list in the
upper-right corner of the dialog box.
OR
If you are receiving maps from internal memory, select the internal memory
drive (for example, EM_USERMAPS E: Removable Disk) from the drop-down
list.
5. In the right pane of the dialog box, click the plus sign next to Saved Map
Packages, and click the map you want to receive into XMap.
OR
To select all map packages, just click Saved Map Packages.
6. Click Receive.
A progress bar indicates the copy status.
7. Click Done.
8. On your Earthmate PN-40, press ENTER to return to GPS use.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the Handheld Export tab or the GPS tab.
Sending/Receiving Routes to/from an Earthmate PN-40
You can use XMap® to exchange routes with the DeLorme Earthmate® PN-40 GPS.
Notes
• To rename, delete, or send/receive a route, right-click the item in the
Exchange dialog and select the appropriate option. You can also delete a map
by clicking the item and then clicking the Delete button.
• If you bypassed the Connect to Computer screen on the device, go to the
Device Setup>Connect to Computer menu and select the option you want
from the USB Setting drop-down list.
• You cannot create trail routes on an Earthmate PN-Series GPS. To follow a