98 WinView/32 Manual Version 2.4.M
➧ To store the most recent image, click
Start Storage
on the Acquisition menu or
click on the
Start Store
icon on the
Custom Toolbar
(description on page 239).
Data acquisition will halt and the most recent image will be stored in a file having
the name specified on the
Data File
tab page.
➧ If you wish to initiate another data acquisition, select
Focus
again. To store the new
data to disk, again click
Start Storage
on the Acquisition menu or click on the
Start Store
icon. This completes the initial data acquisition routine, which should
work with any PI Controller.
Figure 78.
Typical Data
Acquisition
Image.