Filter
Top Products
Chapter 15 Menus and Dialog Boxes 253
DG-535 Comm Port tab page
Allows you to set the communications port and parameters for communications between
the computer and the pulser/timing generator. Additionally provides for initializing the
port. See Chapter 13 for additional information.
Parameters
Port Type:
Determines which type port will be used. Select GPIB for communications
with the DG-535.
Init:
Immediately initializes the selected Comm Port. If the pulser/timing generator is
not correctly connected to that Comm port or not turned on, an error message
will appear.
Control Buttons:
Download to DG-535:
Clicking on this button immediately sends all current dialog
values to the DG-535. Selecting
Download to DG-535
also changes the name
on the
Cancel
button to
Close
, indicating that canceling is no longer an
option.
OK:
Click on this button to close the dialog. Selecting this button does
not
automatically
program the pulser/timing generator. To program the selected values into the
timing generator you must click on
Download to DG-535
.
Cancel:
The Cancel button exits the dialog without saving any settings. The pulser is
reprogrammed with the new values when you execute
Download to DG-535
.
Selecting
Download to DG-535
also changes the name on the
Cancel
button
to
Close
, indicating that canceling is no longer an option.
Help:
Click on this button to open the online help for this window.
Figure 215.
DG-535 Comm
Port tab page.