Filter
Top Products
388 WinView/32 Manual Version 2.4.M
150 int rtanum; /* Not used by WinView */
152 int astdiode; /* Not used by WinView */
154 int int78; /* Not used by WinView */
156 int int79; /* Not used by WinView */
158 double calibpol[4]; /* Not used by WinView */
190 int int96; /* Not used by WinView */
192 int int97; /* Not used by WinView */
194 int int98; /* Not used by WinView */
196 int int99; /* Not used by WinView */
198 int int100; /* Not used by WinView */
200 char exprem[5][80]; /* comments */
600 int int301; /* Not used by WinView */
602 char label[16]; /* Not used by WinView */
618 int gsize; /* Not used by WinView */
620 int lfloat; /* Not used by WinView */
622 char califile[16]; /* calibration file. Not used by WinView */
638 char bkgdfile[16]; /* background file. Not used by WinView */
654 int srccmp; /* Not used by WinView */
656 int stripe; /* number of strips per frame */
658 int scramble; /* 0 - scramble, 1 - unscramble */
660 long lexpos; /* exposure val 32-bits(when exposure=-1) */
664 long lnoscan; /* no. of scan 32-bits(when noscan = -1) */
668 long lavgexp; /* no. of accum 32-bits(when avgexp = -1) */
672 char stripfil[16]; /* strip file. Not used by WinView */
688 char version[16]; /* SW version & date "01.000 02/01/90" */
704 int controller_type; /* 1-new st120, 2-old st120, */
/* 3-st130 type 1, 4-st130 type 2, */
/* 5-st138, 6-DC131, and ST133. */
/* YT_FILE_HEADER */
/* The YT variables are not used by WinView. */
706 int yt_file_defined; /* set TRUE for YT data file */
708 int yt_fh_calib_mode; /* calibration type */
710 int yt_fh_calib_type; /* time-unit (calibration type) */
712 int yt_fh_element[12]; /* element number */
736 double yt_fh_calib_data[12]; /* data */
832 float yt_fh_time_factor; /* time-factor */
836 float yt_fh_start_time; /* start time */
840 int reverse_flag; /* set to 1 if data should be */
/* reversed, 0 don't reverse */
};
Version 1.6 Header
All WinView/WinSpec files (version1.6) and WinView/32 and WinSpec/32 data files
must begin with the following 4100 byte header. Data files created under previous
versions of WinView/WinSpec can still be read correctly. However, files created under
the new versions (1.6 and higher)
cannot
be read by previous versions of
WinView/WinSpec.
Header Structure Listing
Decimal Byte