Filter
Top Products
230 WinView/32 Manual Version 2.4.M
Vertical Shade & Horizontal Shade:
These parameters allow you to independently
set the amount of vertical and horizontal shading to be applied to the image to
compensate for illumination non-uniformity. The range is 0 to 99 and the default
is 50 for both parameters. With respect to actual screen illumination, the range is
nominally 30%. If the field illumination non-uniformity exceeds this range, it
will be necessary to correct it at the experiment level. The Shading box must be
checked for the shading to be applied.
Edge Enhance box:
Checking this box causes the edge-enhance function to be
applied.
Shading:
Checking this box causes the horizontal and vertical shading functions to be
applied.
Gray Scale:
When checked, causes a full-range grayscale bar image to be displayed.
This display is very convenient in setting the monitor’s brightness and contrast
controls. For the best image in most situations, the darkest bar should be black
and the brightest should be full white.
Control Buttons:
Close:
Implements any setting changes and closes the window.
Help:
Displays context-sensitive help for the V/ICCD (Focus) tab page.
Control menu
This menu is accessed by clicking on the icon at the far left in the Title bar. It provides
basic control of the WinView/32 software via the following selections.
Restore:
Use this command to return the active window to the size and position it had
prior to using the
Maximize
or
Minimize
command.
Move:
Use this command to display a four-headed arrow so you can move the active
window or dialog box with the arrow keys.
Note:
This command is unavailable if you maximize the window.
Size:
Use this command to display a four-headed arrow so you can size the active
window with the arrow keys.
After the pointer changes to the four-headed arrow:
➧ Press one of the DIRECTION keys (left, right, up, or down arrow key) to
move the pointer to the border you want to move.
➧ Press a DIRECTION key to move the border.
Figure 204.
Control menu.