Filter
Top Products
244 WinView/32 Manual Version 2.4.M
Focus:
Clicking on Focus initiates a data-collection run in which the data is not
stored until Start Storage is selected.
OK:
Click on OK to save the changes and close the Experiment Setup window
without initiating a data collection run.
Cancel:
Click on this button to close the Experiment Setup window without making
any changes.
Help:
Opens context-sensitive help for whichever tab page is on top.
Data File tab page
The Data File tab page allows you to name the data file that will be used to save
collected data. The settings on this page only affect documents created by clicking on the
Focus
or
Acquire
menu items or toolbar buttons. In other words, these settings are for
data collection, not post-processes. It also provides for auto-saving and for auto-
incrementing the file name defined via a template. In addition, there is provision for
selecting the data type manually or of having it automatically selected.
Data File Name:
Enter a template name for the data you are about to collect. Use
standard Windows 95 long-name conventions, and WinView/32 will add the
.SPE extension. If no Datafile name is used, a temporary name will be assigned.
There is only one name template for both the "auto-increment" and "non-auto-
increment" cases. If "auto-increment" is enabled, then the current value is added
to the template name, otherwise the template name is used "as-is". If there is no
template name then the template name "Untitled" is used.
Figure 210.
Data File tab
page.