Filter
Top Products
222 WinView/32 Manual Version 2.4.M
C page
All math operations, simple or complex, linear or non-linear, involve writing the results
to the output file specified via the
C
file page. A description of the items on this page
follows. See Chapter 9 for a discussion of Image Math operations.
Parameters
Output C:
The name of the output file is entered in this text box. The button at the end
of the box opens a browser to assist in assuring that the file will be saved in the
proper directory (folder).
Frame:
Allows the user to set the number of frames of output data to be saved in the
C
file. The default is to save all frames processed.
X Range:
Allows the user to set the X output data range to be saved in the
C
file. The
default is to save all data processed.
Note:
The length and width of the output data region cannot be larger than that
of the A and B data regions.
Y Range:
Allows the user to set the Y output data range to be saved in the
C
file. The
default is to save all data processed.
Note:
The length and width of the output data region cannot be larger than that
of the A and B data regions.
Datatype:
The data-type of the
C
file can be specified by the user.
Display Result:
Checking this box will cause the resulting image to be displayed after
processing is complete.
Figure 196.
Image Math C
tab page.