Filter
Top Products
108 WinView/32 Manual Version 2.4.M
Displaying circuit.spe
The image used in this exercise is circuit.spe, one of the images supplied with your
WinView/32 software. Once you become comfortable working with this image, you
should have little difficulty in working with images from actual measurement data.
➧ From the File menu select Open. The Open dialog box (Figure 85) will appear,
allowing you to select the image to be opened. The Look-In box provides a browser
function so that the directory where the images are located can be easily accessed.
The default directory is C:\Princeton Instruments\WinView\data. Files of the
specified type in the current directory and any subdirectories are listed in the box
below the directory name. The WinView/32 data type is WinXData (*.spe).
Note:
The directory can be changed by changing the selection in the Look-In box.
The next time the Open dialog box is opened, the new folder name will appear in the
box and its contents will be listed below.
➧ If the
Auto-Select
check box contains a check, deselect it. Then select
Image
.
➧ From the data directory select the image file called CIRCUIT.SPE. Click on the OK
button. A window of the appropriate dimensions should appear immediately. The
image display (Figure 86) may take a few seconds, depending on the speed of the
computer.
Figure 85.
Open dialog
box.