Filter
Top Products
Chapter 15 Menus and Dialog Boxes 337
PTG Pulse Counter
The Pulse Counter dialog box, which is opened by clicking on
Pulse Counter
on the
Acquisition
menu, reports the number of gate commands sent to the PI-MAX by the
PTG. A new reading is taken each time the
Read
button is clicked. Both main and burst
gate commands are counted. The
Close
button closes the box.
PTG Pulsing tab page
Selects the Continuous or Sequential Pulsing mode and allows access to the setup
screens for Continuous or Sequential Pulsing. Allows bracket pulsing of the PI-MAX
MCP to be switched ON or OFF. Additionally enables the Anticipator and Burst
functions. See Chapter 13 for additional information on controlling a pulser/timing
generator.
Parameters
Continuous:
Opens the Continuous Pulsing dialog box. See discussion on page 228 for
detailed information.
Sequential:
Opens the Sequential Pulsing dialog box. See discussion on page 258 for
detailed information.
Figure 297.
PTG Pulse
Counter dialog
box.
Figure 298.
PTG Pulsing
tab page.