Filter
Top Products
Chapter 13 Pulser Operation 193
➧ If operating in the
Internal
trigger mode, set the
Trigger Frequency
in Hz.
Consult the DG-535 Manual to determine the maximum Trigger Frequency that can
be used in your application.
➧ If operating in the
External
trigger mode, specify the
Slope
,
Threshold
, and
Termination
appropriate for the trigger source.
➧ Click on the
Pulsing
tab to bring the Pulsing tab page to the front.
➧ Select
Bracket Pulsing On
or
Off
.
Note:
Bracket pulsing is only useful in low duty factor gated measurements in the
UV with an PI-MAX camera. See your PI-MAX manual (formerly ICCD-MAX
manual) for detailed information.
➧ Select
Continuous
or
Sequential
and then click on the adjacent
Setup
button.
Figure 176.
DG-535
Triggers tab
page.
Figure 177.
DG-535
Pulsing tab
page.