Filter
Top Products
92 WinView/32 Manual Version 2.4.M
Data Collection Procedures (controller specific)
MicroMAX or ST-133
The procedure that follows for these controllers is in two parts,
Video Focusing
and
Data Collection
. In focusing, images are displayed on the video monitor (not the
computer monitor) and no data is collected. This allows rapid and easy adjustment of the
system optics. Once the settings have been optimized, data collection begun can begin.
Focusing
This procedure applies for a MicroMAX or ST-133 system that includes a video
monitor. If your system doesn’t include a video monitor, go to the
Data Collection -
All Controllers
section, which begins on page 97.
➧ Select
Video
on the Acquisition menu. This will allow live data to be displayed on
your video monitor.
➧ Select
Video Focus
from the Acquisition Menu. The
Interactive Camera
dialog
box (Figure 74) will open.
Figure 73.
Acquisition
menu.
Figure 74.
Micro
MAX
or
ST-133
Interactive
Camera dialog
box.