Filter
Top Products
96 WinView/32 Manual Version 2.4.M
V/ICCD Control Box
Focusing
➧ Select
Video Focus
from the Acquisition Menu. The
Control Box Focus
window will open with two tab pages as illustrated in Figure 77. Whenever the
V/ICCD is powered, image data is applied to the video monitor. If
Focus
or
Acquire
is selected, data will also be displayed at the computer.
➧ Adjust the camera optics and the Control Box
Camera
parameters for the best
displayed image. Leave the Control Box
Box
parameters set to their default values.
The exposure time will be the same as that set via the Experiment Setup
Main
tab
page. The two exposure settings track. Changing it at either location will update the
other setting automatically. The other selections and values shown are the defaults
and will give good results in most instances.
➧ When no further improvement in the image can be obtained, click on
Close
to close
the dialog box.
Data Collection
➧ Click on
Focus
or on the
Focus
icon of the Custom Toolbar. Images will be
continuously displayed at the computer monitor as they are acquired.
➧ To store the most recent image, click
Start Storage
on the Acquisition menu or
click on the
Start Store
icon on the
Custom Toolbar
(description on page 239).
Data acquisition will halt and the most recent image will be stored in a file having
the name specified on the
Data File
tab page.
Figure 76.
V/ICCD Focus
window.