Filter
Top Products
304 WinView/32 Manual Version 2.4.M
Operation tab page
See Chapter 9 for additional information.
Linear Operations
Addition:
The
A
file is added, pixel by pixel, to the
B
file and the results written to the
C
file. It is also possible to add a constant entered on the
B
tab page to each
point on the
A
file, with the results written to the
C
file.
Subtraction:
The
B
file is subtracted, pixel by pixel, from the
A
file and the results are
written to the new file. It is also possible to subtract a constant entered on the
B
tab page from each point on the
A
file, with the results written to the
C
file.
Multiplication:
The
A
file is multiplied, pixel by pixel, by the
B
file and the results
written to the
C
file. It is also possible to multiply each pixel of the
A
file by a
constant entered on the
B
tab page, with the results written to the
C
file.
Division:
The
A
file is divided, pixel by pixel, by the
B
file and the results written to
the
C
file. It is also possible to divide each pixel of the
A
file by a constant
entered on the
B
tab page, with the results written to the
C
file.
MIN:
The
A
file is compared, pixel by pixel, with the
B
file and the smaller of the two
values written to the
C
file. It is also possible to compare each pixel of the
A
file
with a constant entered on the
B
tab page, with the smaller of the two values
written to the
C
file.
Figure 264.
Operation tab
page.