Filter
Top Products
58 WinView/32 Manual Version 2.4.M
MicroMAX
Controller/Detector page
Controller Type:
Select MicroMAX
Controller Version:
Set to match the version of your controller. Later versions of
the MicroMAX have features unavailable in earlier ones. For proper operation,
version selection must match the actual controller version.
Camera Type:
Select the camera type installed in your system.
Shutter Type:
There are five selections, None, Small, Large, Remote and
Electronic. For most cameras, the correct setting is Small. In the case of a
camera having a very large CCD, such as the Kodak 2k × 2k, a large shutter may
have been installed, in which case the correct setting will be Large. The Remote
setting would not normally apply to the MicroMAX, since Remote is primarily
intended for spectroscopy applications where an external shutter would be
placed ahead of the entrance slit. Electronic only applies to operation with an
Intensified camera, which would normally not be equipped with a mechanical
shutter. This selection would apply to both the Gate and Shutter/CW modes of
the IIC-100 or MCP-100. If the MicroMAX has no shutter (frame-transfer or
interline CCD array), select None.
Figure 50.
Micro
MAX
Controller/Cam
-era selection.