Filter
Top Products
Chapter 15 Menus and Dialog Boxes 295
This dialog box, which is opened by selecting
Load Factory Defaults
on the
Setup
menu, and then selecting
From Controller
allows the values stored in the Controller’s
NVRAM to be reloaded.
Features
Load NVRAM Defaults:
This button causes the faults in the selected file to be loaded.
View NVRAM Defaults:
This button displays the contents of the NVRAM so that they
can be reviewed.
Close:
Closes the dialog box.
Help:
Opens context-sensitive help for the Load Factory Defaults dialog box.
Look-Up Table tab page (Process menu)
See Look-Up Table discussion on page 167.
Macro menu
With the exception of Execute macro, these functions are not fully operational in
software releases prior to 2.5.
Record macro:
Opens the Record Macro window (page 349) and allows Visual Basic
script macros to be recorded. Record Macro function not fully operational in
software releases prior to Version 2.5.
Execute macro:
Opens the Execute dialog box (page 272), which allows executable
programs to be run from inside WinView/32.
Main tab page
The Experiment Setup Main tab page is used to specify the most essential acquisition
parameters. These include the Exposure Time, Number of Images, Number of
Accumulations and the choice of Full Chip or Region of Interest readout. The Full Chip
vs. ROI choice is not available if the selected controller is a V/ICCD or V/ICCD Control
Box. Other selections are additionally provided when using an PI-MAX camera as
described below.
Figure 256.
Macro menu.