Filter
Top Products
374 WinView/32 Manual Version 2.4.M
V/ICCD Focus - Camera tab page
This tab page (Figure 336), accessed by selecting
Video Focus
on the Acquisition
Setup menu with V/ICCD as the selected controller, gives you software control over the
basic V/ICCD operating parameters.
Parameters
Exposure:
There is no difference between setting the exposure time here or setting it
from the Main tab page of the Experiment Setup window.
CCD Gain:
This is the post-CCD preamplifier gain. The default setting is 70. Users are
advised not to change the CCD Gain without first carefully reviewing the
V/ICCD manual to obtain a thorough understanding of all possible
consequences.
Intensifier:
This sets the intensifier gain. Users are advised not to change the default
value of 10 without first carefully reviewing the V/ICCD manual to obtain a
thorough understanding of all possible consequences.
Temperature:
Sets the control temperature. The default temperature setting is -5°.
Automatic Gain:
When checked, Automatic Gain Control (AGC) adjusts video gain to
bring peak white level of signal up to nearly 100% of the standard RS170 signal.
Automatic Brightness:
When checked, Automatic Brightness Control (ABC) adjusts
the intensifier’s MCP voltage in response to changes in the input light conditions
up to 80% of maximum voltage.
Figure 336.
V/ICCD Focus
Camera tab
page.