Filter
Top Products
Chapter 15 Menus and Dialog Boxes 367
Control Buttons:
OK:
Click on this button to close the Timing Generator Interactive Pulse Width and
Delay dialog box. On clicking on
OK
, the new parameter values are sent to the
Timing Generator.
Cancel:
The
Cancel
button exits the Timing Generator Interactive Pulse Width
and Delay dialog box without saving any settings.
Help:
Click on this button to open the online help for this window.
Timing Generator Interactive Trigger Setup dialog box
The Timing Gen Interactive Trig Setup dialog box, accessed by clicking on the
button of the Custom toolbar, allows you to select the PTG or DG-535 Trigger mode
(Internal or External) and, if Internal is selected, to set the Frequency, while acquiring
data.
Parameters
Trigger Frequency:
The trigger frequency is used with internal triggering.
Trigger Mode radio buttons:
The trigger mode determines whether the Timing
Generator will create its own trigger signals (
Internal
selected), or will itself be
triggered by trigger signals that originate in an external piece of equipment
(
External
selected).
Control Buttons:
OK:
Click on this button to close the Timing Generator Interactive Trigger Setup
dialog box. On clicking on
OK
, the new parameter values are sent to the Timing
Generator.
Cancel:
The
Cancel
button exits the Timing Generator Trigger Setup dialog box
without saving any settings.
Help:
Click on this button to open the online help for this window.
Figure 330.
Timing
Generator
Interactive
Trigger Setup
dialog box.