Filter
Top Products
Chapter 15 Menus and Dialog Boxes 345
Control Buttons:
Download to PTG:
Clicking on this button immediately sends all current dialog
values to the PTG. Selecting
Download to PTG
also changes the name on the
Cancel
button to
Close
, indicating that canceling is no longer an option.
OK:
Click on this button to close the dialog. Selecting this button does
not
automatically program the pulser/timing generator. To program the selected
values into the timing generator you must click on
Download to PTG
.
Cancel:
The
Cancel
button exits the dialog without saving any settings. The pulser
is reprogrammed with the new values when you execute
Download to PTG
.
Selecting
Download to PTG
also changes the name on the
Cancel
button to
Close
, indicating that canceling is no longer an option.
Help:
Click on this button to open the online help for this window.
Pulse Counter
The Pulse Counter dialog box, which is opened by clicking on
Pulse Counter
on the
Acquisition
menu, reports the number of gate commands the PTG sends to the PI-
MAX. The reading is updated each time the
Read
button is clicked. Both main and burst
gate commands are counted. The
Close
button closes the box.
Pulsers dialog box
The Pulsers dialog box, which opens when
Pulsers
is selected on the
Setup
menu,
allows the user to choose whether the software is configured to run a PG-200 Pulser, a
DG-535 Timing Delay Generator, a PTG Timing Generator plug-in module or no pulser.
To the right of the pulser-selection radio buttons is the
Setup
button that gives access to
the pulser setup screens.
Figure 305.
Pulse Counter
dialog box.
Figure 306.
Pulsers dialog
box.