Filter
Top Products
36 WinView/32 Manual Version 2.4.M
➧ The File Installation screen depicted in Figure 21 appears next. The names of the
individual files appear in the message box as they are loaded and the installation
progress in percent is continuously displayed. Completing the installation for each
floppy causes a message to appear directing you to remove that disk and insert the
next one.
➧ Next the Configuration Disk query appears as shown in Figure 22. The disk referred
to is shipped with each
new hardware system
. It is not part of the WinView/32
package. This disk contains the file pihwdef.ini, which lists all of the system
components that are normally specified via the Hardware Setup Wizard by the user
during the Hardware Setup procedure (Chapter 3). If pihwdef.ini is loaded, the
required information is read directly from pihwdef.ini and the Wizard doesn’t run.
Select
No
if you don’t have the Configuration Disk (Wizard will run during
Hardware Setup allowing the required hardware information to be specified). Select
Yes
if you do have the Configuration Disk. Then insert the Configuration Disk as
directed so that pihwdef.ini will be copied to the directory containing the
WinView/32 application files.
Figure 21. File
installation
screen.
Figure 22.
Configuration
Disk Query.