Roper 4411-0046 Automobile Accessories User Manual


 
62 WinView/32 Manual Version 2.4.M
MicroView
Controller/Detector page
Controller Type:
Select MicroView
Controller Version:
Set to match the version of your controller. Later versions of
the MicroView have features unavailable in earlier ones. For proper operation,
version selection must match the actual controller version.
Camera Type:
Select the camera type installed in your system.
Shutter Type:
There are five selections, None, Small, Large, Remote and
Electronic. For most cameras, the correct setting is Small. The Remote setting
would not normally apply to the MicroView, since Remote is primarily intended
for spectroscopy applications where an external shutter would be placed ahead
of the entrance slit. Electronic only applies to operation with an Intensified
camera, which would normally not be equipped with a mechanical shutter. If the
camera has neither a mechanical shutter nor provision for electronic shuttering,
select None.
Readout Mode:
Full Frame
is the only available readout mode.
Display page
See Display Page discussion on page 82.
Figure 52.
MicroView
Controller/Cam
-era selection.