vi GP4020 GPS Baseband Processor Design Manual
Document References
References to the following documents are made within the GP4020 GPS Baseband Processor Design Manual:
1) "ARM7TDMI Technical Reference Manual"
ARM DDI 0029F, Rev 4 Copyright ARM Limited 2001.
Arm Ltd. Documentation website (http://www.arm.com/arm/documentation?OpenDocument)
Document Conventions
The following terms which appear in the Manual, are defined here:
a) External device: device such as a memory or logic;
b) External Master: A Master device sited on the system bus;
c) low or clear: refers to a logical condition 0 of a signal or bit-field;
d) high or set: refers to a logical condition 1 of a signal or bit-field;
e) Numbers prefixed with '0x': hexadecimal;
f) Numbers prefixed with '0y': binary;
g) 'Reserved': When associated with a register field, the location should not be
written to or read from. When used in a bit-field among other
referenced fields, the default value must be maintained during write
operations.
h) Register field bit positions are represented within square brackets, thus: [n] ;