Filter
Top Products
2-48 PERIODIC MAINTENANCE
Maintenance Procedure
•
Install a new element [A] so that the element ends [B]
insert along the rib [C] in the housing.
CAUTION
Use only the recommended air cleaner element
(Kawasaki part number 11013-0004). Using another
air cleaner element will wear the engine prema-
turely or lower the engine performance.
•
Tighten:
Torque - Air Cleaner Element Cover Screws: 1.1 N·m (0.11
kgf·m, 9.7 in·lb)
Fuel Hose Replacemen t
•
Remove the fuel tank (see Fuel Tank Removal in the Fuel
System (DFI) c hapter).
•
Be sure to place a piece of cloth [A] around the fuel hose
joint.
•
Insert a minus screw driver [B] into the slit [C] on the joint
lock.
•
Turn [A] the driver to disconnect the joint lock [B].
•
Pull [C] the fuel hose joint [D] out of the delivery pipe.
WARNING
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
When the fuel hose is disconnected, fuel spills out
from the hose and the pipe. Cover the hose connec-
tion with a clean shop towel to prevent fuel spillage.
•
Install the new fuel hose so that the white mark [A] side
faces throttle body assy.
•
Insert [B] the fuel hose joint [C] straight onto the delivery
pipe until the hose joint clicks.
•
Push [D] the joint lock [E].
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com