Filter
Top Products
3-96 FUEL SYSTEM (DFI)
Exhaust Butterfly Valve Actuator (Service Code 63)
Exhaust Butterfly Valve Actuator Removal
•
Remove the seat cover (see Seat Cover Removal in the
Frame chapter)
•
Slide the dust covers [A].
•
Loosen the locknuts [B], and turn the adjuster to give the
cable plenty of play [C].
•
Remove:
Clamp [A]
Exhaust Butterfly Valve Cables [B]
Connectors [C]
•
Remove:
Bolts [A]
Exhaust Butterfly Valve [B]
•
Remove exhaust butterfly valve actuator pulley [A].
○
Hold the pulley with a suitable tool.
CAUTION
If the pulley bolt is removed without holding, the
actuator damage will occur.
Exhaust Butterfly Valve Actuator Installation
•
Install the pulley [A] on the actuator.
•
Hold the pulley with a suitable tool [B] and tighten the bolt.
Torque - Exhaust Butterfly Valve Actuator Pulley Bolt: 5.0
N·m (0.50 kgf·m, 44 in·lb)
CAUTION
If the pulley bolt is tightened without holding, the
actuator damage will occur.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com