Filter
Top Products
16-56 ELECTRICAL SYSTEM
Electric Starter System
•
Replace the O-rings [A] with new ones.
•
Put the armature [B] among the brushes [C].
•
Apply a thin coat of grease to the oil seal [A].
•
Fit the toothed washer [B] into the left-hand end cover.
•
Align the marks [A] to assembly the yoke and the end
covers.
•
Replace the O-rings [A] with new ones.
•
Tighten:
Torque - Starter Motor Through Bolts [B]: 3.4 N·m (0.35
kgf·m, 30 in·lb)
•
Replace the O-rings [A] with new ones.
•
Apply grease to the new O-rings.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com