Filter
Top Products
13-20 SUSPENSION
Rear Shock Absorber
Rebound Damping Force Adjustment
•
To adjust the rebound damping force, turn the lower
damping adjuster [A] to the desired position, until you
feel a click.
○
The standard adjuster setting for an average-build rider
of 68 kg (150 lb) with no passenger and no accessories
is the 2 turns out from the fully clockwise position.
Rebound Damping Force Adjustment
Adjuster
Position
Damping
Force
Setting
Load Road
Speed
21/2Turns
Out
Weak
Soft
Light
Good
Low
↑ ↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓ ↓
0
Strong
Hard Heavy Bad High
Compression Damping Fo rce Adjustme nt
•
To adjust the compression damping force, turn the upper
damping adjuster [A] to the desired position until you feel
a click.
○
The standard adjuster setting for the average-build rider
of 68 kg (150 lb) with no passenger and no accessories
is the 4 turns out from the fully clockwise position.
Rebound Damping Force Adjustment
Adjuster
Position
Damping
Force
Setting Load Road Speed
4 Turns
Out
Weak
Soft
Light
Good
Low
↑ ↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓ ↓
0
Strong
Hard Heavy Bad High
Spring Preload Adjustment
•
Loosen the locknut and turn out the adjusting nut to free
the spring.
Special Tool - Hook Wrench: 57001-1101
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com