Filter
Top Products
CRANKSHAFT/TRANSMISSION 9-13
Crankcase Splitting
•
Apply liquid gasket [A] to the mating surface of the lower
crankcase half.
Sealant - Kawasaki Bond: 92104-1064
NOTE
○
Especially, apply a sealant so that it shall be filled up on
the grooves.
CAUTION
Do not apply liquid gasket around the crankshaft
main bearing inserts, and oil passage hole.
•
Fit the lower crankcase half to the upper crankcase half.
NOTE
○
Make the application finish within 20 minutes when the
liquid gasket to the mating surface of the crankcase half
is applied.
○
Moreover fit the case and tighten the bolts just after
application of the liquid gasket.
•
The M9 bolts [A] has a copper plated washer [B], replace
it with a new one.
•
Apply molybdenum disulfide oil solution to both sides [C]
of the washers and threads [D] of M9 bolts.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com