Filter
Top Products
FRAME 15-9
Fairings
Lower Fairing Removal
•
Pull up the core [A] by the thin blade driver [B].
•
Remove:
Quick Rivets [A]
Bolts [B] with Washers
Screws [C]
•
Separate the right lower fairing [D] from the left lower fair-
ing.
•
Clear the hook portion and projection [E] from the slots.
•
Remove the right lower fairing.
Lower Fairin g Installation
•
Insert the hook portion [A] into the slot [B], and put the
projection [C] into the hole [D].
•
Tighten the bolts with washers.
•
Set the quick rivet [A] and push the core [B].
Middle Fairing Removal
•
Remove:
Lower Fairings (see Lower Fairing Removal)
Upper Inner fairings (see Upper Inner Fairing Removal)
Bolts [A] with Washers
Quick Rivets [B]
•
Disconnect the right turn signal lead connector.
•
Clear the hook portions [D] from the slots by pulling the
middle fairing backward.
•
Remove the right middle fairing [C].
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com