Kawasaki ZX-10R Automobile User Manual


 
PERIODIC MAINTENANCE 2-13
Specifications
Item Standard Service Limit
Fuel System (DFI)
Throttle Grip Free Play 2 3 mm (0.08 0.12 in.)
–––
Idle Speed 1 100 ±50 r/min (rpm) –––
Throttle Body Vacuum 31.5 ±1.3 kPa (236 ±10 mmHg) at idle speed –––
Air Cleaner Element Viscous paper element –––
Cooling System
Coolant:
Type (Recommended) Permanent type antifreeze
–––
Color Green –––
Mixed Ratio Soft water 50%, coolant 50% –––
Freezing Point –35°C (–31°F) –––
Total Amount 2.9L(3.1USqt) –––
Engine Top End
Valve Clearance:
Exhaust 0.17 0.22 mm (0.0067 0.0087 in.) –––
Inlet 0.15 0.24 mm (0.0059 0.0094 in.) –––
Clutch
Clutch Lever Free Play 2 3 mm (0.08 0.12 in.) –––
Engine Lubrication System
Engine Oil:
Type API SE, SF or SG –––
API SH, SJ or SL with JASO MA
Viscosity
SAE 10W-40
–––
Capacity 3.2 L (3.4 US qt) (when filter is not removed) –––
3.7 L (3.9 US qt) (when filter is removed)
–––
4.0 L (4.2 US qt) (when engine is completely dry) –––
Level Between upper and lower level lines (Wait 2 3
minutes after idling or running)
–––
Wheels/Tires
Tread Depth:
Front
6.0 mm (0.24 in.) 1 mm (0.04 in.),
(AT, CH, DE)
1.6 mm (0.06 in.)
Rear 6.5 mm (0.26 in.) Up to 130 km/h
(80 mph):
2 mm (0.08 in.),
Over 130 km/h
(80 mph):
3 mm (0.12 in.)
Air Pressure (when Cold):
Front Up to 180 kg (397 lb) load:
250 kPa (2.50 kgf/cm², 36 psi)
–––
Rear
Up to 180 kg (397 lb) load:
290 kPa (2.90 kgf/cm², 42 psi)
–––
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com