16-64 ELECTRICAL SYSTEM
Lighting System
•
Push and turn the front turn signal light bulb [A] counter-
clockwise and remove it.
•
Replace the bulb with new ones.
•
Insert the new bulb [A] by aligning its upper and lower pins
[B] with the upper and lower grooves [C] in the soket, and
turn the bulb clockwise.
○
Turn the bulb about 15° degrees.
•
Pushing the socket and turn it clockwise.
○
Fit the projections [A] of the socket into the grooves [B] of
the turn signal light.
•
Install the middle fairing (see Middle Fairing Installation in
the Frame chapter).
Rear Turn Signal Light
•
Remove:
Screws [A]
Rear Turn Signal Light Lens [B]
•
Push and turn the rear turn signal light bulb [A] counter-
clockwise and remove it.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com