Filter
Top Products
7-10 ENGINE LUBRICATION SYSTEM
Oil Pressure Relief Valve
Oil Pressure Re lief Valve Removal
•
Remove:
Oil Pan (see Oil Pan Removal)
Oil Screen [A]
•
Remove the oil pressure relief valve [A].
Oil Pressure Relief Valve Installation
•
Apply a non-permanent locking agent to the threads of
the oil pressure relief valve [A], and tighten it.
CAUTION
Do not apply too much non-permanent locking
agent to the threads. This may block the oil pas-
sage.
Torq u e - Oil Pre s su r e Relief Valve: 15 N·m (1.5 kgf·m, 11
ft·lb)
•
Clean the o il screen [B].
•
Install the O-ring [C] and damper [D] to the oil screen.
•
Install the oil screen so that the crankcase rib [E] and relief
valve fits the oil screen.
•
Install the oil pan (see Oil Pan Installation).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com