Filter
Top Products
16-86 ELECTRICAL SYSTEM
Immobilizer System (Equipped M odels)
Case 2: When the ignition switch is faulty and to be
replaced.
•
Prepare a new ignition switch [A] and two new user keys
[B].
○
These parts are available as a set. Prepare the current
master key [C].
•
Remove:
Ignition Switch and Immobilizer Antenna (see Immobi-
lizer System Parts Replacement)
Front Seat (see Front Seat Removal in the Frame chap-
ter)
•
Disconnect the immobilizer/Kawasaki diagnostic system
connector.
•
Connect the key registration unit [A].
Special Tool - Key Registration Unit: 57001-1582
•
Connect:
New Ignition Switch Lead Connector [A]
Immobilizer Antenna Lead Connector [B]
NOTE
○
Keep the antenna more than 15 cm from the ignition
switch.
•
Put the current master key [A] at the antenna [B]. Insert
the new user key 1 [C] to the new ignition switch [D] and
turn it ON.
Verified
○
The warning indicator light (LED) and immobilizer warning
symbol [A] blinks to display the ECU is in the registration
mode (go to the next step).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com