Filter
Top Products
15-20 FRAME
Frame
Rear Frame R emoval
•
Remove:
Vehicle-down Sensor (see Vehicle-down Sensor Re-
moval in the Fuel System (DFI) chapter)
Seat Cover (see Seat Cover Removal)
Rear Fender Front (see Rear Fender Front Removal)
Clamps for Main Harness
Frame Bolts [A]
Rear Frame Installa tion
•
Tighten:
Torque - Rear Frame Bolts: 44 N·m (4.5 kgf·m, 32 ft·lb)
Frame Inspection
•
Visually inspect the frame for cracks, dents, bending, or
warp.
If there is any damage to the frame, replace it.
WARNING
A repaired frame may fail in use, possibly causing
an accident. If the frame is bent, dented, cracked,
or warped, replace it.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com