Filter
Top Products
16-76 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
Neutral Indicator Light (LED) Inspection
○
Connect the 12 V battery and terminals in the same man-
ner as specified in the “Liquid Crystal Display (LCD) Seg-
ments check.”
•
Using the insulated auxiliary lead, 12 V battery to the me-
ter unit connector as follows.
○
Connect the battery negative (–) terminal to the terminal
[5].
○
When the terminals are connected, the neutral indicator
light (LED) should go on.
If the neutral indicator light (LED) does not go on, replace
the meter assembly.
Warning Indicator Light (LED) (Oil Pressure Warning)
Inspection
○
Connect the 12 V battery and terminals in the same man-
ner as specified in the “Liquid Crystal Display (LCD) Seg-
ments check.”
•
Using the insulated auxiliary lead, 12 V battery to the me-
ter unit connector as follows.
○
Connect the battery negative (–) terminal to the terminal
[13].
○
When the terminals are connected, the warning indicator
light (LED) [A] and symbol [B] blinks.
If the warning indicator light and/or symbol do not blinks,
replace the meter assembly.
Right and Left Turn Signal Indicator Light (LED)
○
Connect the 12 V battery and terminals in the same man-
ner as specified in the “Liquid Crystal Display (LCD) Seg-
ments check.”
•
Using the insulated auxiliary leads, 12 V battery to the
meter unit connector as follows.
○
Connect the battery positive (+) terminal to the terminal
[15].
○
Connect the battery negative (+) terminal to the terminal
[16].
○
When the terminals are connected, the turn signal indica-
tor light (LED) should go on.
If the turn signal indicator light (LED) does not go on, re-
place the meter assembly.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com