Filter
Top Products
PERIODIC MAINTENANCE 2-39
Maintenance Procedure
Electrical System
Lights and Switches Operation Inspection
First Step
•
Turn on the ignition switch.
•
The following lights should go on according to below table.
City Light [A]
goes on
Taillight [B]
goes on
License Plate Light [C]
goes on
Meter Pa n el Illumination Light (LED) [D]
goes on
Meter Panel LCD [E]
goes on
Neutral Indicator Light (LED) [F]
goes on
Oil Pressure Warning Symbol [G] and
Warning Indicator Light (LED) [H]
blinks (about 3
seconds after)
If the light does not go on, inspect or replace the following
item.
Battery (see Charging Condition Inspection in the Elec-
trical System chapter)
Applicable Bulb (see Wiring Diagram in the Electrical
System chapter)
Meter Unit for Meter Panel LCD (see Electronic Com-
bination Meter Unit Inspection in the Electrical System
chapter)
Meter Unit for Neutral Indicator Light (LED) (see Elec-
tronic Combination Meter Unit Inspection in the Electri-
cal System chapter)
Meter Unit for Warning Indicator Light (LED) (Oil Pres-
sure Warning) (see Electronic Combination M eter Unit
Inspection in the Electrical System chapter)
Meter Unit for Illumination Light (LED) (see E lectric Com-
bination Meter Unit Inspection in the Electrical System
chapter)
ECU (see ECU Power Supply Inspection in the Fuel Sys-
tem (DFI) chapter)
Main Fuse 30 A and Taillight Fuse 10 A (see Fuse In-
spection in the Electrical System chapter)
Ignition Switch (see Switch Inspection in the Electrical
System chapter)
Neutral Switch (see Switch Inspection in the Electrical
System chapter)
Harness (see Wiring Inspection in the Electrical System
chapter)
•
Turn off the ignition switch.
•
The all lights should go off (for the immobilizer model,
Warning Indicator Light (LED) will blinks. see Abstract in
the Electrical System chapter).
If the light does not go off, replace the ignition switch.
Second Step
•
Turn the ignition switch to P (Park) position.
•
The city light, taillight and license plate light should go on.
If the light does not go on, inspect or replace the following
item.
Ignition Switch (see Switch Inspection in the Electrical
System chapter)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com