Filter
Top Products
STEERING 14-7
Steering Damper
Steering Damper Removal
•
Remove the TORX bolt [A] and washer [B].
•
Remove the bolt [C], washer, collar and steering damper
[D].
Steering Damper Insta llation
•
Install the steering damper [F] and parts as shown.
Collar [A]
Washer [B]
Fuel Tank Bracket [C]
Bolt [D]
Washer [E]
•
Tighten a new TORX bolt [G].
Damping Force Adjustment
•
To adjust the damping force, turn the damping adjuster
[B] clockwise or counterclockwise.
Steering Damper [A]
Softer (counterclockwise) [C]
Harder (clockwise) [D]
○
The standard adjuster setting is the 18 turns out (fully
counterclockwise position) from the fully clockwise po-
sition.
Damping Force Adjustment
Adjuster Position Damping Force
Setting
18 turns out (fully
counterclockwise position)
Weak
Soft
↑ ↑ ↑
↓ ↓ ↓
0
Strong
Hard
Steering Damper Oil Leak Inspection
•
Refer to the Steering Damper Oil Leak Inspection in the
Periodic Maintenance chapter (see Steering Damper Oil
Leak Inspection in the Periodic Maintenance chapter).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com