Filter
Top Products
16-70 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
Electronic Combination Meter Unit Inspection
•
Remove the meter unit (see Meter Unit Removal) [A].
[1] Ignition
[2] Fuel Level Warning Indicator Light (LED) (–)
[3] Stop Watch (+)
[4] Lap Time (+)
[5] Neutral Indicator Light (LED) (–)
[6] ECU Communication Signal
[7] Tachometer Signal
[8] Water Temperature Sensor (–)
[9] Unused
[10] Unused
[11] Ground (–)
[12] Battery (+)
[13] Warning Indicator Light (LED) (Oil Pressure Warning)
(–)
[14] Unused
[15] Right Turn Signal indicator Light (LED) (+)
[16] Left Turn Signal indicator Light (LED) (+)
[17] High Beam Indicator Light (LED) (+)
[18] Speed Sensor Signal
[19] Unused
[20] Unused
CAUTION
Do not drop the meter unit. Place the meter unit so
that it faces upward. If the meter assembly is left up-
side down or sideways for a long time or dropped,
it will malfunction. Do not short each terminals.
Liquid Crystal Display (LCD) Segments Check
•
Using the insulated auxiliary leads, connect the 12 V bat-
tery to the meter unit connector as follows.
○
Connect the battery positive terminal to the terminal [12].
○
Connect the battery negative terminal to the terminal [11].
•
Connect the terminal [1] to the terminal [12].
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com