Filter
Top Products
5-40 ENGINE TOP END
Muffler
Muffler Body Installation
If the muffler body cover [A] was removed, install it.
○
Fit the dampers [B] of the muffler body into the slots [C]
in the muffler cover.
Torque - Muffler Body Cover Bolts [D]: 7.0 N·m (0.70 kgf·m,
62 in·lb)
•
Replace the muffler body gasket [E] with a new ones.
•
Install the muffler body.
○
Pass the muffler stay [F] through the hole [G] of the rear
fender front [H].
•
Tighten:
Torque - Muffler Body Assembly Nuts [I]: 22 N·m (2.2 kgf·m,
16 ft·lb)
Muffler Body Mounting Bolts [J]: 25 N·m (2.5
kgf·m, 18 ft·lb)
•
Throughly warm up the engine, wait until the engine cools
down, retighten all the bolts and nuts.
•
Install the removed parts (see appropriate chapters).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com