Filter
Top Products
FUEL SYSTEM (DFI) 3-131
Air Line
Element Removal
•
Refer to the Air Cleaner Element Replacement in the Pe-
riodic Maintenance chapter (see Air Cleaner Element Re-
placement in the Periodic Maintenance chapter).
Element Installation
•
Refer to the Air Cleaner Element Replacement in the Pe-
riodic Maintenance chapter (see Air Cleaner Element Re-
placement in the Periodic Maintenance chapter).
Air Cleaner Element Inspection
•
Remove the air cleaner element (see Air Cleaner Element
Replacement in the Periodic Maintenance chapter).
•
Visually check the element [A] for tears or breaks.
If the element has any tears or breaks, replace the ele-
ment.
Air Cleaner Housing Removal
•
Remove:
Air Cleaner Element (see Air Cleaner Element Replace-
ment in the P eriodic Maintenance chapter)
Air Cleaner Housing Mounting Bolts [A]
Inlet Air Temperature Sensor [B]
○
Do not disconnect the inlet air temperature s ensor lead
connector.
•
Remove the hoses [A].
•
Remove the air cleaner housing [B] from the air ducts and
holder.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com