Filter
Top Products
3-126 FUEL SYSTEM (DFI)
Throttle Body Assy
•
Remove:
Air Switching Valve Hose [A]
Vacuum Hoses [B] (California Model)
•
Remove the middle fairings (see Middle Fairing Removal
in the Frame chapter).
•
Loosen the throttle body assy holder clamp bolts [A] on
both sides.
•
Remove the throttle case [A] to make a throttle cable
slack.
•
Remove the adjuster screw [A] from the clamp [B].
•
Pull off the throttle body assy [A] from the holder.
•
Remove:
Clamp [B]
Throttle Cable Lower Ends [C]
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com