Filter
Top Products
ENGINE REMOVAL/INSTALLATION 8-11
Engine Removal/Installation
○
Fifth, tighten the middle engine mounting nut [H], and then
lower engine mounting nut [I].
Torque - Middle Engine Mounting Nut: 44 N·m (4.5 kgf·m,
32 ft·lb)
Lower Engine Mounting Nut: 44 N·m (4.5 kgf·m,
32 ft·lb)
○
Sixth, remove the bolt [D] temporally, and using the
hexagon wrench, turn the adjusting collar [J] until the
clearance [K] between the cylinder head and frame come
to0mm(0in.).
○
Seventh, using the engine mount nut wrench (special
tool), tighten the adjusting collar locknut [L].
Special Tool - Engine Mount Nut Wrench: 57001-1450
Torque - Adjusting Collar Locknut: 49 N·m (5.0 kgf·m, 36
ft·lb)
○
Lastly, reinstall the bolt [D] and tighten it.
Torque - Right Front Engine Mounting Bolt: 44 N·m (4.5
kgf·m, 32 ft·lb)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com