Filter
Top Products
13-6 SUSPENSION
Specifications
Item Standard
Front Fork (Per One Unit)
Fork Inner Tube Diameter 43 mm (1.7 in.)
Air Pressure Atmospheric pressure (non-adjustable)
Rebound Damper Setting 10th click from the first click of the fully clockwise
position
(Usable range: 0 ←→ 11 clicks)
Compression Damper Setting 10th click from the first click of the fully clockwise
position
(Usable range: 0 ←→ 13 clicks)
Fork Spring Preload Setting Adjuster protrusion is 17 mm (0.67 in.)
(Usable range: 4 ∼ 19 mm) (0.16 ∼ 0.75 in.)
Fork Oil:
Viscosity KHL15-10 (KAYABA) or equivalent
Amount:
When Changing Oil Approx. 480 mL (16.2 US oz.)
After Disassembly and Completely Dry 567 ±4 mL (19.2 ±0.14 US oz.)
Fork Oil Level: (Fully Compressed, without
Spring, below from the Top of the Outer
Tube)
111±2mm(4.37±0.08in.)
Fork Spring Free Length 232.1 mm (9.14 in.) (Service limit: 227 mm (8.94 in.))
Rear Shock Absorber
Rebound Damper Set 2 turns out from the fully clockwise position
(Usable range: 0 ←→ 2 1/2 turns out)
Compression Damper Set 4 turns out from the fully clockwise position
(Usable range: 0 ←→ 4 turns out)
Spring Preload Setting Position
Standard Spring length: 179 mm (7.0 in.)
Usable Range
Spring length: 179 ∼ 191.5 mm (7.047 ∼ 7.539 in.)
(weaker to stronger)
Gas Pressure 980 kPa (10 kgf/cm², 142 psi, non-adjustable)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com