Filter
Top Products
FRAME 15-21
Sidestand
Sidestand R emoval
•
Raise the rear wheel off the ground with the stand.
•
Remove:
Lower Fairings (see Lower Fairing Removal)
•
Disconnect the sidestand switch lead connector [A] and
clear the lead from the clamps [B].
•
Remove:
Sidestand Switch Bolt [A]
Spring [B]
Sidestand Bolt [C]
Sidestand [D]
Switch Bracket Bolt [E]
Sidestand Bracket Bolts [F]
Sidestand In stallation
•
Apply grease to the sliding area [A] of the sidestand [B]
and thread of the sidestand bolt [C].
•
Apply a non-permanent locking agent to the threads of
sidestand bracket bolts.
•
Tighten the bolt and lock them with the nut.
Torque - Sidestand Bracket Bolts [D]: 49 N·m (5.0 kgf·m, 36
ft·lb)
Sidestand Bolt: 44 N·m (4.5 kgf·m, 32 ft·lb)
•
Hook the spring [E] so that face the long spring end up-
ward.
○
Install the spring hook direction as shown.
•
Install the switch bracket and sidestand switch.
○
Apply a non-permanent locking agent to the thread of the
switch bolt.
Torque - Sidestand Switch Bolt [F]: 8.8 N·m (0.90 kgf·m, 78
in·lb)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com