ELECTRICAL SYSTEM 16-107
Relay Box
The relay box [A] has relays and diodes. The relays and
diodes can not be removed.
Relay Box Removal
•
Remove the front seat (see Front Seat Removal in the
Frame chapter).
•
Take out the relay box [A] and disconnect the connectors
[B].
Relay Circuit Inspection
NOTE
○
The ECU main relay function is included in the ECU.
•
Remove the relay box (see Relay Box Removal).
•
Check conductivity of the following numbered terminals
by connecting the hand tester and one 12 V battery to the
relay box as shown (see Relay Box Internal Circuit).
If the tester does not read as specified, replace the relay
box.
Relay Circuit Inspection (with the battery disconnected)
Tester Connection Tester Reading (Ω)
Headlight Relay 1-3
∞
4-5
∞
Fuel Pump Relay
6-7
Not ∞*
8-13
∞
Starter C ircu it Relay
8-9
∞
14-17
∞
Fan Relay
15-16
Not ∞*
*: The actual reading varies with the hand tester used.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com