ENGINE TOP END 5-21
Camshaft, Camshaft Chain
•
Remove the camshaft chain tensioner (see Camshaft
Chain Tensioner Removal).
•
Loosen the upper chain guid bolts and camshaft cap bolts
as shown sequence [1 ∼ 20] in the figure, and remove
them.
•
Remove:
Upper Chain Guide [A]
Camshaft Caps [B]
Camshafts [C]
•
Stuff a clan cloth into the chain tunnel to keep any parts
from dropping into the crankcase.
•
Remove the cam sprocket mounting bolts [A].
•
Remove the cam sprocket.
CAUTION
The crankshaft may be turned while the camshafts
are removed. Always pull the chain taut while turn-
ing the crankshaft. This avoids kinking the chain
on the lower (crankshaft) sprocket. A kinked chain
could damage both the chain and the sprocket.
Camshaft Installation
•
Be sure to install the following parts.
Plug Hole Gaskets [A]
Dowel Pins [B]
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com