16-42 ELECTRICAL SYSTEM
Ignition System
○
Remove:
Right Engine Bracket Bolts [A]
Right Engine Bracket [B]
○
Pull out the stick coil #4 [A] to forward.
Stick Coil (Ignition Coil together with Spark Plug
Cap) Installation
•
Apply grease to the stick coils.
•
Insert the stick coils [A] as shown being careful of the coil
heads directions.
○
Align the lines [B] of the cylinder head cover and coil
heads.
CAUTION
Do not tap the coil head while installing the coil.
•
Connect the stick coil connectors.
•
Run the hoses and harness correctly (see Cable, Wire,
and Hose Routing section in Appendix chapter).
•
Install the left and right engine bracket (see Engine Instal-
lation in the Engine Removal/Installation chapter).
•
Install the removed parts (see appropriate chapters).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com