Filter
Top Products
CLUTCH 6-11
Clutch
•
Remove:
Torque Limiter Springs [A]
SubClutchHub[B]
Clutch Hub [C]
Spacer [D]
○
Remove the sub clutch hub bolts [E] as necessary.
•
Using the two 4 mm (0.16 in.) screws [A], pull out the
sleeve [B], needle bearing [C] and clutch housing [D].
•
Remove the spacer.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com