Filter
Top Products
16-62 ELECTRICAL SYSTEM
Lighting System
Tail/Brake Light (LED) Removal
•
Refer to the Seat Cover Removal in the Frame chapter
(see Seat Cover Removal in the Frame chapter).
Tail/Brake Light (LED) Insta llation
•
Refer to the Seat Cover Installation in the Frame chapter
(see Seat Cover Installation in the Frame chapter).
License Plate Light Bulb Replacement
•
Remove:
Screws [A]
License Plate Light Cover [B]
•
Push and turn the bulb [A] counterclockwise wise and re-
move it.
•
Replace the bulb with a new one.
•
Insert the new bulb [A] by aligning its upper and lower pins
[B] with the upper and lower grooves [C] in the socket, and
turn the bulb clockwise.
○
Turn the bulb about 15° degrees.
•
Tighten:
Torque - Licence Plate Light Cover Screws: 1.2 N·m (0.12
kgf·m, 11 in·lb)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com