Filter
Top Products
3-30 FUEL SYSTEM
Fuel Tank
•
Install:
Vacuum Hose [A] and Clamp [B]
Fuel Level Sensor Lead Connector
•
Install the removed parts.
Fuel Tank Cleaning
•
Remove the fuel tank and drain it (see Fuel Tank Re-
moval).
•
Pour some high-flash point solvent into the fuel tank and
shake the tank to remove dirt and fuel deposits.
WARNING
Clean the tank in a well-ventilated area, and take
care that there is no spark or flame anywhere
near the working area; this includes any appliance
with a pilot light. Because of the danger of highly
flammable liquids, do not use gasoline or low-flash
point solvents to clean the tank. A fire or explosion
could result.
•
Pour the solvent out the tank.
•
Dry the tank with compressed air.
•
Install the fuel tank (see Fuel Tank Installation).
Fuel Tap Removal
•
Remove:
Fuel Pump (see Fuel Pump Removal)
Fuel Tap Mounting Bolts [A]
Vacuum Hose [B]
Fuel Tap [C]
Fuel Tap Installation
•
Be sure the O-ring [A] is in good condition to prevent leak-
age.