Filter
Top Products
5-26 ENGINE TOP END
Camshaft
Front Camshaft Chain
•
Install the circlip [A].
Special Tool - Outside Circlip Pliers: 57001-144
•
Rotate the crankshaft clockwise 270°.
•
Align the key grooves [B] on the crankshaft with the em-
bossed line [C] on the crankcase.
•
Move the intermediate shaft [A] to the left side of the en-
gine.
•
Engage the front cam shaft chain [B] with the sprocket on
the intermediate shaft.
•
Install (left side view):
Position Pl ate [A]
•
Tighten:
Torque - Position Plate Bolts [B]: 8.8 N·m (0.90 kgf·m, 78
in·lb)
•
Install:
Intermediate Shaft Chain Guide [A] (front)
•
Tighten:
To rque - Intermediate Shaft Chain Guide Bolts [B]: 8.8 N·m
(0.90 kgf·m, 78 in·lb)
•
Install:
Intermediate Shaft Chain Guide [A] (Rear)
Washer [B]
Circlip [C]
Special Tool - Outside Circlip Pliers: 57001-144